PROFIBUS DPV1 Master for CompactLogix
ILX69-PBM
The ILX69-PBM PROFIBUS DPV1 Master module provides all the advantages of in-chassis PROFIBUS communication, such as the inclusion of an AOI and the Autoscan features which greatly reduce your commissioning time, and ComDTM that provides remote Ethernet connectivity with asset management software.
With these modules, CompactLogix™ processors can easily communicate with slave devices supporting PROFIBUS DPV0 and DPV1 protocol. The module acts as an input/output module between the PROFIBUS network and the processor supporting complete Master specifications according to IEC 61158.
- Description
Description
PROFIBUS DPV1 Master for CompactLogix
The ILX69-PBM PROFIBUS DPV1 Master module provides all the advantages of in-chassis PROFIBUS communication, such as the inclusion of an AOI and the Autoscan features which greatly reduce your commissioning time, and ComDTM that provides remote Ethernet connectivity with asset management software.
With these modules, CompactLogix™ processors can easily communicate with slave devices supporting PROFIBUS DPV0 and DPV1 protocol. The module acts as an input/output module between the PROFIBUS network and the processor supporting complete Master specifications according to IEC 61158.
Features and Benefits
- AOI: Module communication is integrated within Studio/RSLogix 5000 using a sample Add-On Instruction (AOI), or sample ladder logic file, reducing commissioning time.
- Autoscan: The new Autoscan feature reduces start up times and simplifies troubleshooting by scanning the PROFIBUS network and uploading slave device addresses and configuration information. (Reads and maps nodes automatically to the module.)
- ComDTM: Allows remote Ethernet connectivity with Asset Management Software significantly lowering maintenance costs. You can configure, commission, maintain and diagnose your fieldbus devices throughout their entire lifecycle with this comprehensive, fully integrated engineering and maintenance environment.
- SD card slot (SD card optional) is used for storing configuration files in the event of a disaster. It can also be used to update the firmware of the module without the need of a 1769 CPU.
Architectures
Specifications
PROFIBUS DP Specifications
| Specification | Description |
| Slaves | Maximum 125 |
| Input/Output | Maximum 244 Bytes per Slave |
| Input Data | Maximum 5712 Bytes |
| Acyclic Data | DPV1 |
| Status data | 88 Bytes |
| Output data | Maximum 5760 Bytes |
| DPV1 services | Class 1 Read/Write Class 1 Alarm Class 2 Initiate/Read/Write/Data transport/Abort |
| Services | Global-Control, Slave-Diagnostic, Set-Parameter |
| Sync, Freeze Command | Supported |
| Baud rate | 9.6 kBaud, 19.2 kBaud, 45.45 kBaud, 93.75 kBaud, 187.5 kBaud, 500 kBaud, 1.5 MBaud, 3 MBaud, 6 MBaud, 12 MBaudAuto-detection mode is supported |
NOTE: All products are pre-order items
