PLX31-EIP-PND
PLX31-EIP-PND

EtherNet/IP to PROFINET IO Device Gateway

PLX31-EIP-PND
EtherNet/IP to Square D Remote I/O Gateway
AN-X2-SQD
EtherNet/IP to Siemens Industrial Ethernet Communication Gateway
PLX32-EIP-SIE

The EtherNet/IP™ to PROFINET® IO Device (slave) gateway offers bi-directional data transfers between EtherNet/IP™ controllers and a PROFINET® IO controller. The EtherNet/IP™ Driver supports I/O connections for guaranteed data delivery or Message instructions to send data to/from the PACs. The gateway supports 1440 bytes of input data and 1440 bytes of output data for larger applications.

In addition, the gateway’s multiple I/O connections, allow you to set different RPIs for control data and module diagnostics, enabling you to optimize your Ethernet bandwidth.

A conformal coating option is available for this product.

Add to Wishlist

Description

EtherNet/IP to PROFINET IO Device Gateway

The EtherNet/IP™ to PROFINET® IO Device (slave) gateway offers bi-directional data transfers between EtherNet/IP™ controllers and a PROFINET® IO controller. The EtherNet/IP™ Driver supports I/O connections for guaranteed data delivery or Message instructions to send data to/from the PACs. The gateway supports 1440 bytes of input data and 1440 bytes of output data for larger applications.

In addition, the gateway’s multiple I/O connections, allow you to set different RPIs for control data and module diagnostics, enabling you to optimize your Ethernet bandwidth.

A conformal coating option is available for this product.

Architectures

PLX31-EIP-PND Schematic

Features and Benefits

  • Embedded EDS Add-On Profile allows for simplified integration and reduced configuration time for Rockwell Automation PACs.
  • No ladder programming is required when using I/O connections.
  • Multiple I/O connections allow you to set different RPIs for status and control data, enabling Ethernet bandwidth optimization.
  • Communication via an I/O connection provides guaranteed data delivery and enables the PAC to monitor for communication faults.
  • SD card slot (SD card optional) is used for storing configuration files in the event of a disaster.
  • ProSoft Discovery Service allows your PC to find the gateway and change its default IP address without being on the same subnet.
  • Video setup tutorial provided at psft.com/Ap5
  • Secure module configuration via module switch (v1.04 and greater).
  • Up to 10,000 16-bit registers can be used to exchange large amounts of data.

Specifications

Number of Class 3 Server Connections 5
Supported PLC Types PLC2, PLC5, SLC, CLX, CMPLX
Supported Message Types PCCC and CIP
Number of Class 3 Client Connections Connected – 2
Unconnected – 1
Number of Class 1 I/O Connections 8
Max I/O connection sizeIn/Out 496/496 bytes
Max RPI time 10 ms per connection
CIP Services Supported 0x4C – CIP Data Table Read
0x4D – CIP Data Table Write
Command List Support for 100 commands per Client, each configurable
for command type, IP address, register to/from addressing
and word/bit count.
Command Sets PLC-2/PLC-3/PLC5 Basic Command Set
PLC5 Binary Command Set
PLC5 ASCII Command Set
SLC500 Command Set

Hardware Specifications

Power Supply 24 VDC nominal
10 to 36 VDC allowed
Positive, Negative, GND Terminals
Current Load 24 VDC nominal @ 300 mA
10 to 36 VDC @ 610 mA maximum
Operating Temperature -25°C to 70°C (-13°F to 158°F)
Storage Temperature -40°C to 80°C (-40°F to 176°F)
Shock IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
Vibration IEC 60068-2-6; 5G @ 10 to 150 Hz
Relative Humidity 5% to 95% RH with no condensation
Dimensions (H x W x D) 5.38 x 1.99 x 4.38 in
13.67 x 5.05 x 11.13 cm
LED Indicators Configuration (CFG), Error (ERR), Power (PWR),
Hardware Fault (FLT), Network Status (NS),
EtherNet/IP™ Class I or Class III Connection Status
(EtherNet/IP Only) Module Status (MS), ModuleConfiguration
Status (EtherNet/IP Only) Ethernet Communication
Port Link/Activity, and 100 mbit
Ethernet Port 10/100Mbit half-duplex RJ45 Connector Electrical Isolation
1500 Vrms at 50 to 60 Hz for 60 seconds, applied as
specified in section 5.3.2 of IEC 60950: 1991 Ethernet
Broadcast Storm Resiliency is less than or equal to
5000 [ARP] frames-per-second and less than or equal to
5 minutes duration
Shipped With Each Unit 2.5 mm screwdriver
J180 Power Connector

NOTE:  All products are pre-order items

Specifications, downloads & certifications