EtherNet/IP to Siemens Industrial Ethernet

PLX31-EIP-SIE
Hot

EtherNet/IP to Siemens Industrial Ethernet

PLX31-EIP-SIE

ProSoft Technology’s EtherNet/IP™ to Siemens® Industrial Ethernet communication gateway allows high-speed bi-directional data transfers between EtherNet/IP™-enabled controllers or devices and Siemens® S7 PACs, including S7-200s, S7-300s, S7-400s, S7-1200 and S7-1500 PACs.

In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.

  • Description

Description

EtherNet/IP to Siemens Industrial Ethernet

ProSoft Technology’s EtherNet/IP™ to Siemens® Industrial Ethernet communication gateway allows high-speed bi-directional data transfers between EtherNet/IP-enabled controllers or devices and Siemens S7 PACs, including S7-400s, S7-300s, S7-200s and S7-1200 PACs.

In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.

Features and Benefits

  • Data prioritization: Multiple I/O connections allow you to set RPIs for status and/or control data, optimizing Ethernet bandwidth.
  • Includes an embedded EDS Add-On Profile, allowing for simplified integration and reduced commissioning time.
  • Includes a SD card slot (SD card optional) for storing configuration files. This can be used for disaster recovery.
  • ProSoft Discovery Service: This utility allows your PC to see the gateway and change its default IP address without being on the same subnet.
  • Secure module configuration via module switch (v1.04 and greater).
  • Up to 10,000 16-bit registers can be used to exchange large amounts of data.

Architectures

PLX31-EIP-SIE Schematic

Specifications

EtherNet/IP Specifications

Specification
Description
Number of Class 3 Server Connections 5
Supported PLC Types PLC2, PLC5, SLC, CLX, CMPLX, MICROLX
Supported Message Types PCCC and CIP
Class 3 Client Connections Connected – 2

Unconnected – 1

Number of Class 1 I/O Connections 2
I/O connection sizes 248/248
Max RPI time 5 ms per connection
CIP Services Supported 0x4C – CIP Data Table Read

0x4D – CIP Data Table Write

Command List Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count.
Command Sets PLC-2/PLC-3/PLC5 Basic Command Set

PLC5 Binary Command Set

PLC5 ASCII Command Set

SLC500 Command Set

Siemens Industrial Ethernet Specifications

Specification
Description
Supported PLC Data Exchange (Read and Write) Siemens S7-200, Siemens S7-300, Siemens S7-400,

Siemens S7-1200

Supported Register Types DB, Inputs, Outputs, Flags, Counters, Timers
Supported Clients 20

NOTE:  All products are pre-order items

Specifications, downloads & certifications