PLX31-MBTCP-SIE
PLX31-MBTCP-SIE

Modbus TCP/IP to Siemens Industrial Ethernet Gateway

PLX31-MBTCP-SIE
PLX32-EIP-MBTCP EtherNet/IP to Modbus TCP/IP Communications Gateway
PLX32-EIP-MBTCP
PS-QS-1x10-0117 Modbus TCP/IP to JCI Metasys N2 QuickServer Gateways
PS-QS-1×10-0117

ProSoft Technology’s Modbus® TCP/IP to Siemens Industrial Ethernet gateway allows high-speed bi-directional data transfers between Modbus® TCP/IP controllers and Siemens® S7-400, S7-300, S7-200, S7-1200, and S7-1500 PACs.

In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.

Add to Wishlist

Description

Modbus TCP/IP to Siemens Industrial Ethernet Gateway

ProSoft Technology’s Modbus® TCP/IP to Siemens Industrial Ethernet gateway allows high-speed bi-directional data transfers between Modbus® TCP/IP controllers and Siemens® S7-400, S7-300, S7-200, S7-1200, and S7-1500 PACs.

In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.

Architectures

Schematic PLX31-MBTCP-SIE

Features and Benefits

  • ProSoft Discovery Service utility allows your PC to see the gateway and edit its default IP address without being on the same subnet.
  • Supports up to 20 simultaneous client & server connections, allowing for faster communication between devices such as HMIs, SCADA systems, power monitors and flow computers, among others.
  • In addition to S7 controllers, the gateway can also be used with Siemens® S5 controllers with an appropriate interface.
  • Gateway includes a SD card slot (SD card optional) for storing configuration files. This can be used for disaster recovery.
  • Secure module configuration via module switch (v1.04 and greater).
  • Up to 10,000 16-bit registers can be used to exchange large amounts of data.

Specifications

Modbus TCP/IP Specifications

Specification Description
Supported Modbus Function Codes 1: Read Coil Status
2: Read Input Status
3: Read Holding Registers
4: Read Input Registers
5: Force (Write) Single Coil
6: Preset (Write) Single Holding Register
15: Force (Write) Multiple Coils
16: Preset (Write) Multiple Holding Registers
22: Mask Write Holding Register (Slave Only)
23: Read/Write Holding Registers (Slave Only)
Supported Clients 10
Supported Servers MBAP: 5
Encapsulated: 5
Command List Up to 160 fully configurable Client commands
Status Data Error codes reported individually for each command
Command List Polling Each command can be individually enabled or disabled;
write-only-on-data-change is available

Siemens Industrial Ethernet Specifications

Specification Description
Supported PLC Data Exchange (Read and Write) Siemens S7-200, S7-300, S7-400, S7-1200, S7-1500
Supported Register Types DB, Inputs, Outputs, Flags, Counters, Timers
Supported Clients 20

NOTE:  All products are pre-order items

Specifications, downloads & certifications