Modbus TCP\/IP Enhanced Communication Module<\/h2>\n
The MVI69E-MBTCP Modbus TCP\/IP module for the CompactLogix\u2122 series of controllers is designed for all applications requiring Modbus TCP connectivity. This module comes with an Add-on Profile and an Add-on Instruction to reduce commissioning time. The MVI69E-MBTCP has a single Ethernet port for diagnostic and application data. The module supports both Client and Server connectivity to interface with a variety of devices using the Modbus Protocol.<\/p>\n<\/div>\n
\u00a0<\/p>\n
Architectures<\/h2>\n
![\"MVI69E-MBTCP\"](\"https:\/\/www.throughput.co.za\/products\/wp-content\/uploads\/2017\/12\/MVI69E-MBTCP.png\")
<\/p>\n
\u00a0<\/h2>\nFeatures and Benefits<\/h2>\n\n- Supports CompactLogix processors with 1769 I\/O bus capability version 16 and greater (MicroLogix 1500 not supported)<\/li>\n
- Add-on Instruction creates UDTs, providing logical definitions for I\/O, status, and control data<\/li>\n
- Add-on Profile support for RSLogix 5000 v.20 and greater, improving integration in the CompactLogix system<\/li>\n
- Diagnostic data available in RSLogix 5000 controller tags, enabling decisions to be made based upon node health<\/li>\n
- Module configuration backed up in CompactLogix project (ACD file)<\/li>\n
- Module acts as a co-processor reducing impact to PLC scan time<\/li>\n
- Supports up to 10,000 words of data<\/li>\n
- Supports up to 20 Client and 20 Server connections simultaneously<\/li>\n
- Supports Enron and Daniel-style Floating point data implementations<\/li>\n
- Suitable for SCADA and field device interface applications<\/li>\n<\/ul>\n<\/div>\n
\u00a0<\/p>\n
Specifications<\/h2>\n
\n\n\n\nConfiguration<\/p>\n<\/td>\n
\nProSoft Configuration Builder<\/p>\n<\/td>\n<\/tr>\n
\n\nI\/O Size<\/p>\n<\/td>\n
\n60\/120\/240 – 16 bit integers<\/p>\n<\/td>\n<\/tr>\n
\n\nAvailable Data<\/p>\n<\/td>\n
\n10,000 words<\/p>\n<\/td>\n<\/tr>\n
\n\nFloating Point\u00a0
Data<\/p>\n<\/td>\n
\nFloating point data movement supported, including configurable support for Enron, Daniel\u00ae, and other implementations<\/p>\n<\/td>\n<\/tr>\n
\n\nModbus Function
Codes Supported<\/p>\n<\/td>\n
\n1: Read Coil Status
2: Read Input Status
3: Read Holding Registers
4: Read Input Registers
5: Force (Write) Single Coil
6: Preset (Write) Single Holding Register
8: Diagnostics (Slave Only, Responds
\u00a0to Sub function 00)<\/p>\n<\/td>\n
\n15: Force (Write) Multiple Coils
16: Preset (Write) Multiple Holding Registers
17: Report Slave ID (Slave Only)
22: Mask Write Holding Register (Slave Only)
23: Read\/Write Holding Registers (Slave Only)<\/p>\n
\u00a0<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\u00a0<\/p>\n
- \n
- Supports CompactLogix processors with 1769 I\/O bus capability version 16 and greater (MicroLogix 1500 not supported)<\/li>\n
- Add-on Instruction creates UDTs, providing logical definitions for I\/O, status, and control data<\/li>\n
- Add-on Profile support for RSLogix 5000 v.20 and greater, improving integration in the CompactLogix system<\/li>\n
- Diagnostic data available in RSLogix 5000 controller tags, enabling decisions to be made based upon node health<\/li>\n
- Module configuration backed up in CompactLogix project (ACD file)<\/li>\n
- Module acts as a co-processor reducing impact to PLC scan time<\/li>\n
- Supports up to 10,000 words of data<\/li>\n
- Supports up to 20 Client and 20 Server connections simultaneously<\/li>\n
- Supports Enron and Daniel-style Floating point data implementations<\/li>\n
- Suitable for SCADA and field device interface applications<\/li>\n<\/ul>\n<\/div>\n
\u00a0<\/p>\n
Specifications<\/h2>\n
\n\n
\n \n Configuration<\/p>\n<\/td>\n
\n ProSoft Configuration Builder<\/p>\n<\/td>\n<\/tr>\n
\n \n I\/O Size<\/p>\n<\/td>\n
\n 60\/120\/240 – 16 bit integers<\/p>\n<\/td>\n<\/tr>\n
\n \n Available Data<\/p>\n<\/td>\n
\n 10,000 words<\/p>\n<\/td>\n<\/tr>\n
\n \n Floating Point\u00a0
Data<\/p>\n<\/td>\n\n Floating point data movement supported, including configurable support for Enron, Daniel\u00ae, and other implementations<\/p>\n<\/td>\n<\/tr>\n
\n \n Modbus Function
Codes Supported<\/p>\n<\/td>\n\n 1: Read Coil Status
2: Read Input Status
3: Read Holding Registers
4: Read Input Registers
5: Force (Write) Single Coil
6: Preset (Write) Single Holding Register
8: Diagnostics (Slave Only, Responds
\u00a0to Sub function 00)<\/p>\n<\/td>\n\n 15: Force (Write) Multiple Coils
16: Preset (Write) Multiple Holding Registers
17: Report Slave ID (Slave Only)
22: Mask Write Holding Register (Slave Only)
23: Read\/Write Holding Registers (Slave Only)<\/p>\n\u00a0<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\u00a0<\/p>\n