Search Results - ethernet extenders

  • You've just added this product to the cart:

    Advanced Industrial Ethernet Extender with bypass relay

    DDW-242-12VDC-BP

    Advanced Industrial Ethernet Extender with bypass relay

    DDW-242-12VDC-BP

    Westermo’s Ethernet extender technology based on SHDSL makes it possible to reuse many types of pre-existing copper cables, which can lead to considerable financial savings when installing new systems. The Wolverine DDW-242 allows effective Ethernet networks to be created over long distances (up to 15 km (9.3 mi)) at data rates up to 15.3 Mbit/s on a single twisted pair cable.

  • You've just added this product to the cart:

    Advanced Industrial Ethernet Extender

    DDW-242-12VDC

    Advanced Industrial Ethernet Extender

    DDW-242-12VDC

    Westermo’s Ethernet extender technology based on SHDSL makes it possible to reuse many types of pre-existing copper cables, which can lead to considerable financial savings when installing new systems. The Wolverine DDW-242 allows effective Ethernet networks to be created over long distances (up to 15 km (9.3 mi)) at data rates up to 15.3 Mbit/s on a single twisted pair cable.

  • You've just added this product to the cart:

    Industrial Ethernet Extender

    DDW-142-12VDC

    DDW-142-12VDC Industrial Ethernet Extender
    DDW-142-12VDC Industrial Ethernet Extender

    Industrial Ethernet Extender

    DDW-142-12VDC

    Westermo’s Ethernet extender technology based on SHDSLmakes it possible to reuse many types of pre-existing copper cables, which can lead to considerable financial savings when installing new systems.The Wolverine DDW-142 allows effective Ethernet networks to be created over long distances (up to 15 km/9.3 mi) at data rates up to 15.3 Mbit/s on a single twisted pair cable. By using two pairs “bonded” this rate can be doubled up to 30.6 Mbit/s. The integral switch allows 2 Ethernet devices to be attached and an RS-232 port allows for a legacy piece of equipment to be incorporated into the IP network.

  • You've just added this product to the cart:

    Industrial Ethernet extender with bypass relay

    DDW-142-12VDC-BP

    DDW-142-12VDC-BP Industrial Ethernet Extender
    DDW-142-12VDC-BP Industrial Ethernet Extender

    Industrial Ethernet extender with bypass relay

    DDW-142-12VDC-BP

    Westermo’s Ethernet extender technology based on SHDSL makes it possible to reuse many types of pre-existing copper cables, which can lead to considerable financial savings when installing new systems. DDW-142-12VDC-BP allows effective Ethernet networks to be created over long distances (up to 15 km/9.3 mi) at data rates up to 15.3 Mbit/s on a single twisted pair cable. By using two pairs “bonded” this rate can be doubled up to 30.6 Mbit/s. The integral switch allows 2 Ethernet devices to be attached and an RS-232 port for a legacy piece of equipment to be incorporated into the IP network.

     

    Industrial Ethernet Extender with bypass relay
    2 x RJ-45, 10 Mbit/s, 100 Mbit/s, manual or auto
    2 x 2-position detachable screw terminal
    1 x RJ-45, 300 bit/s – 115.2 kbit/s

  • You've just added this product to the cart:

    EN 50155 Ethernet Broadband Bridge

    DDW-002-B1

    EN 50155 Ethernet Broadband Bridge

    DDW-002-B1

    The Wolverine series consists of Ethernet extenders and bridges for propagating Ethernet traffic over existing cabling. The DDW-002-B1 is based on power line communication (IEEE 1901) and is capable of bridging high bandwidth Ethernet traffic over 2-wire cables, even when there are oxidized connectors. This can lead to considerable financial savings when refurbishing a train with Ethernet communication, as existing train couplers can be reused without the need for a costly rebuild or even replacement.

  • You've just added this product to the cart:

    Ethernet SHDSL Extender

    DDW-120

    DDW-120 Ethernet SHDSL Extender
    DDW-120 Ethernet SHDSL Extender

    Ethernet SHDSL Extender

    DDW-120

    The Wolverine series of Ethernet extenders allow cost effective Ethernet networks to be created over long distances, at data rates of up to 15.3 Mbit/s. The SHDSL technology makes it possible to reuse many types of pre-existing copper cables. This can lead to considerable financial savings as expensive fibre cables do not need to be installed. Dependent on cable characteristics, distances up to 15 km (9.3 mi) can be achieved. Configuration of the DDW-120 is performed using only DIP switches, which ensures rapid installation.

  • You've just added this product to the cart:

    Industrial Ethernet Extender

    DDW-142

    DDW-142 Industrial Ethernet Extender
    DDW-142 Industrial Ethernet Extender

    Industrial Ethernet Extender

    DDW-142

    Westermo’s Ethernet extender technology based on SHDSLmakes it possible to reuse many types of pre-existing copper cables, which can lead to considerable financial savings when installing new systems.The Wolverine DDW-142 allows effective Ethernet networks to be created over long distances (up to 15 km/9.3 mi) at data rates up to 15.3 Mbit/s on a single twisted pair cable. By using two pairs “bonded” this rate can be doubled up to 30.6 Mbit/s. The integral switch allows 2 Ethernet devices to be attached and an RS-232 port allows for a legacy piece of equipment to be incorporated into the IP network.

  • You've just added this product to the cart:

    Industrial Ethernet Extender

    DDW-142-485

    DDW-142-485 Industrial Ethernet Extender
    DDW-142-485 Industrial Ethernet Extender

    Industrial Ethernet Extender

    DDW-142-485

    Westermo’s Ethernet extender technology based on SHDSL makes it possible to reuse many types of pre-existing copper cables which can lead to considerable financial savings when installing new systems. The Wolverine DDW-142-485 allows effective Ethernet networks to be created over long distances (up to 15 km (9.3 mi)) at data rates up to 15.3 Mbit/s on a single twisted pair cable.

  • You've just added this product to the cart:

    Redundant Ring Ethernet Extender

    DDW-225

    Redundant Ring Ethernet Extender

    DDW-225

    The Wolverine DDW-225 allows effective Ethernet networks to be created over long distances (up to 15 km) at data rates up to 15.3 Mbit/s. The SHDSL technology makes it possible to reuse many types of pre-existing copper cables which can lead to considerable financial savings. Dependent on cable characteristics, distances up to 15 km (9.3 mi) can be achieved.

  • You've just added this product to the cart:

    Ethernet Extender with serial support

    DDW-226

    Ethernet Extender with serial support

    DDW-226

    The Wolverine DDW-226 allows effective Ethernet networks to be created over long distances (up to 15 km) at data rates up to 15.3 Mbit/s. The SHDSL technology makes it possible to reuse many types of pre-existing copper cables which can lead to considerable financial savings. Dependent on cable characteristics, distances up to 15 km (9.3 mi) can be achieved. The combination of WeOS and the integrated RS-232 port allows legacy equipment to become part of an IP backbone network.

  • You've just added this product to the cart:

    Advanced Industrial Ethernet Extender

    DDW-242

    DDW-242 Advanced Industrial Ethernet Extender
    DDW-242 Advanced Industrial Ethernet Extender

    Advanced Industrial Ethernet Extender

    DDW-242

    Westermo’s Ethernet extender technology based on SHDSL makes it possible to reuse many types of pre-existing copper cables, which can lead to considerable financial savings when installing new systems. The Wolverine DDW-242 allows effective Ethernet networks to be created over long distances (up to 15 km (9.3 mi)) at data rates up to 15.3 Mbit/s on a single twisted pair cable.

  • You've just added this product to the cart:

    Advanced Industrial Ethernet Extender

    DDW-242-485

    Advanced Industrial Ethernet Extender

    DDW-242-485

    Westermo Ethernet extender technology based on SHDSL makes it possible to reuse many types of pre-existing copper cables which can lead to considerable financial savings when installing new systems. The Wolverine DDW-142-485 allows effective Ethernet networks to be created over long distances (up to 15 km (9.3 mi)) at data rates up to 15.3 Mbit/s on a single twisted pair cable.

    By using two pairs “bonded” this rate can be doubled up to 30.6 Mbit/s. The integral switch allows 2 Ethernet devices to be attached and an RS-422/485 port allows for a legacy piece of equipment to be incorporated into the IP network.