ControlLogix® control systems use a common control engine with a common development environment to provide high performance in an easy-to-use environment. Tight integration between the programming software, controller, and I/O modules reduces development time and cost at commissioning and during normal operation. You can perform standard and safety control in the same chassis for a truly integrated system. Leverage the high-availability and extreme environment capabilities to meet your application needs.

  • You've just added this product to the cart:

    PROFIBUS DPV1 Slave for ControlLogix

    ILX56-PBS

    ILX56-PBS
    ILX56-PBS

    PROFIBUS DPV1 Slave for ControlLogix

    ILX56-PBS

    The ILX56-PBS PROFIBUS DPV1 Multi-Slave module allows Rockwell Automation® ControlLogix® processors to communicate on a PROFIBUS DP protocol network by emulating up to 10 individual slave devices. This multi-slave support of the module provides the ability to pass up to 2440 bytes of input and output data as high-speed cyclic I/O data on a PROFIBUS DP network.

  • You've just added this product to the cart:

    PROFIBUS DPV1 Master/ Slave for ControlLogix

    ILX56-PBM

    ILX56-PBM
    ILX56-PBM

    PROFIBUS DPV1 Master/ Slave for ControlLogix

    ILX56-PBM

    The ILX56-PBM PROFIBUS DPV1 Master/Multi-Slave module allows Rockwell Automation® ControlLogix® processors to communicate with various PLCs and devices using the PROFIBUS DP protocol.  As a PROFIBUS DP Master, the module can transfer up to 5000 bytes of cyclic I/O data with various slave devices on the network. 

     

    Or you can use the module as a PROFIBUS DP multi-slave, where the module can emulate up to 10 individual nodes on a PROFIBUS DP network, allowing for more cyclic I/O data transfer. 

  • You've just added this product to the cart:

    Generic ASCII Ethernet Enhanced Communication Module

    MVI56E-GEC

    MVI56E-GEC
    MVI56E-GEC

    Generic ASCII Ethernet Enhanced Communication Module

    MVI56E-GEC

    The MVI56E-GEC Generic ASCII Ethernet Interface module is designed to allow ControlLogix® processors to interface easily with ASCII devices using the TCP/IP protocol. Compatible devices may be either ASCII instruments with built-in Ethernet or Ethernet connection via a thin server to the existing ASCII device. Five Servers and Clients are present on the module permitting both the reception and transmission of data between the processor and attached devices.

  • You've just added this product to the cart:

    Enhanced Liquid & Gas Flow Computer for ControlLogix

    MVI56E-AFC

    MVI56E-AFC
    MVI56E-AFC

    Enhanced Liquid & Gas Flow Computer for ControlLogix

    MVI56E-AFC

    ProSoft Technology’s MVI56E-AFC in-chassis flow computer solution allows you to combine the power and scalability of a ControlLogix® automation system with the functionality typically only seen in a stand-alone flow computer or dedicated measurement RTU’s. This provides you with the industry-standard calculations, archiving, and reporting needed for custody transfer and allocation-based measurement functions for Oil and Gas operations. By combining automation and measurement functions into a single solution, this helps to reduce overall support and integration costs for Oil and Gas applications while also decreasing your overall capital spend. This simplified solution allows you to optimize your resources.

  • You've just added this product to the cart:

    IEC 60870-5-101 Master Communication Module

    MVI56-101M

    MVI56-101M
    MVI56-101M

    IEC 60870-5-101 Master Communication Module

    MVI56-101M

    The MVI56 IEC 60870-5-101 Master Network Interface Module allows ControlLogix processors to interface easily with IEC 60870-5-101 Slave devices. The MVI56-101M module interfaces up to 32 serial communication devices with the ControlLogix processor. Two communication ports on the module act as controlling devices (Masters) to interface with controlled devices on their own networks.

  • You've just added this product to the cart:

    Limitorque Master Communication Module

    MVI56-LTQ

    MVI56-LTQ
    MVI56-LTQ

    Limitorque Master Communication Module

    MVI56-LTQ

    The MVI56 Limitorque Valve Actuator Master Network Interface Module allows Rockwell Automation ControlLogix processors to interface easily with Limitorque Valve Actuators and other Limitorque protocol compatible devices.

  • You've just added this product to the cart:

    SM General Communication Module

    MVI56-SMGC

    MVI56-SMGC
    MVI56-SMGC

    SM General Communication Module

    MVI56-SMGC

    The MVI56-SMGC module interfaces an Ethernet communication device using the SM General Communication Protocol with the ControlLogix processor. A single client is present in the module to interface with a single server. The client permits both the reception and transmission of data between the ControlLogix processor and attached device.

  • You've just added this product to the cart:

    IEC 60870-5-101 Slave Communication Module

    MVI56-101S

    MVI56-101S
    MVI56-101S

    IEC 60870-5-101 Slave Communication Module

    MVI56-101S

    The MVI56 IEC 60870-5-101 Slave Network Interface Module is the fastest and easiest way to add IEC 60870-5-101 protocol interface connectivity for the ControlLogix platform. The module has two powerful and highly configurable IEC 60870-5-101 Slave ports, allowing the many SCADA and field devices supporting the IEC protocol to be integrated into the ControlLogix platform.

  • You've just added this product to the cart:

    GE Ethernet Global Data Communication Module

    MVI56-EGD

    MVI56-EGD
    MVI56-EGD

    GE Ethernet Global Data Communication Module

    MVI56-EGD

    [LIMITED AVAILABILITY] – The Ethernet Global Data (EGD) module can be used to interface many different protocols with EGD devices. The EGD driver supports both the producer/consumer service port (18246) and the command service port (7937) using the UDP protocol over an IP network. The user defines the data to be produced and consumed in a configuration file downloaded to the module.

  • You've just added this product to the cart:

    IEC 60870-5-104 Server Communication Module

    MVI56-104S

    MVI56-104S
    MVI56-104S

    IEC 60870-5-104 Server Communication Module

    MVI56-104S

    The MVI56 IEC 60870-5-104 Server Network Interface Module allows ControlLogix processors to interface easily with IEC 60870-5-104 protocol-compatible hosts. The MVI56-104S module has been designed to address applications where a device using the IEC 60870-5-104 protocol needs to communicate with a ControlLogix processor. Functionality of the IEC protocol is very similar to the DNP 3.0 protocol which features time stamping and True Report by Exception (TRBE). These features allow the MVI56-104S module to send a report to the processor without being polled, providing real time data transmission in critical situations.

  • You've just added this product to the cart:

    BASIC Communication Module (DB/BAS compatible)

    MVI56-BAS

    MVI56-BAS
    MVI56-BAS

    BASIC Communication Module (DB/BAS compatible)

    MVI56-BAS

    This single-slot module is a powerful solution that allows the large installed base of legacy BASIC programs for the 1771-DB and 1747-BAS modules to be migrated to the ControlLogix platform with minimal effort.

  • You've just added this product to the cart:

    Scheduled Siemens 3964R Communication Module

    MVI56-S3964R

    MVI56-S3964R
    MVI56-S3964R

    Scheduled Siemens 3964R Communication Module

    MVI56-S3964R

    The MVI56 S3964R Protocol module from ProSoft Technology allows point-to-point communication between a ControlLogix processor (1756-L1, -L1Mx, L55, L6x) and a partner with 3964R communication capability.