Modbus TCP/IP to PROFINET Device Gateway
PLX32-MBTCP-PND
The Modbus TCP/IP to PROFINET device gateway offers bi-directional data transfer between a PROFINET Controller and Modbus TCP/IP networks. The Modbus TCP/IP driver uses multiple clients and servers for faster data throughput. The PROFINET driver operates as a PROFINET device (slave).
The PLX32-MBTCP-PND gateways are stand-alone DIN-rail mounted units that provide two Ethernet ports for network communications, remote configuration, and diagnostics. The onboard SD Card slot (SD card optional) is used for storing configuration files that can be used for recovery, transferring the configuration to another gateway, or general configuration backup.
- Description
Description
Modbus TCP/IP to PROFINET Device Gateway
The Modbus TCP/IP to PROFINET device gateway offers bi-directional data transfer between a PROFINET Controller and Modbus TCP/IP networks. The Modbus TCP/IP driver uses multiple clients and servers for faster data throughput. The PROFINET driver operates as a PROFINET device (slave).
The PLX32-MBTCP-PND gateways are stand-alone DIN-rail mounted units that provide two Ethernet ports for network communications, remote configuration, and diagnostics. The onboard SD Card slot (SD card optional) is used for storing configuration files that can be used for recovery, transferring the configuration to another gateway, or general configuration backup.
Architectures
Features and Benefits
- PROFINET v2 certification with PROFINET class A compliance
- Field-tested with multiple Modbus TCP/IP devices, and PROFINET controllers from multiple vendors
- Remotely view and diagnose Modbus TCP/IP and PROFINET networks
- Remote configuration via the free, intuitive, ProSoft Configuration Builder (PCB) software
- Multiple, simultaneous Modbus TCP/IP client and/or server connections to allow for increased throughput
- Secure module configuration via module switch (v1.04 and greater)
- Up to 10,000 16-bit registers can be used to exchange large amounts of data
Specifications
Modbus TCP/IP Specifications
| Command List | Up to 16 commands per client, each fully configurable for Function Code, slave address, register to/from addressing and word/bit count. | ||
| Supported Modbus Function Codes | 1: Read Coil Status
2: Read Input Status 3: Read Holding Registers 4: Read Input Registers 5: Force (Write) Single Coil 6: Preset (Write) Single Holding Register |
15: Force (Write) Multiple Coils
16: Preset (Write) Multiple Holding Registers 22: Mask Write Holding Register (server only) 23: Read/Write Holding Registers (server only) |
|
| Supported clients | 10 | ||
| Supported servers | MBAP = 5, Encapsulated = 5 | ||
| Command List | Up to 160 fully configurable client commands | ||
| Status Data | Error codes reported individually for each command | ||
| Command List Polling | Each command can be individually enabled or disabled; write-only-on-data-change is available | ||
PROFINET Specifications
| Specification | Description |
| Driver Type | Class A Device |
| PROFINET I/O Data | 1440 bytes IN, 1440 bytes OUT |
| Exchange Types | Cyclic Real-time (RT) and Acyclic Data |
Hardware Specifications
| Specification | Description |
| Power Supply | 24 VDC nominal 10 to 36 VDC allowed Positive, Negative, GND Terminals |
| Current Load | 24 VDC nominal @ 300 mA
10 to 36 VDC @ 610 mA maximum |
| Operating Temperature | -25°C to 70°C (-13°F to 158°F ) |
| Storage Temperature | -40°C to 80°C (-40°F to 176°F ) |
| Relative Humidity | 5% to 95% RH with no condensation |
| Shock | IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational) |
| Vibration | IEC 60068-2-6; 5G @ 10 to 150 Hz |
| Dimensions (H x W x D) |
5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm |
| LED Indicators | *Configuration (CFG)
*Error Status (ERR) *Power (PWR) *Hardware Fault (FLT) *Network Status (NS) Modbus TCP/IP Class I or Class III Connection Status (Modbus TCP/IP only) *Module Configuration Status (Modbus TCP/IP only) |
| Ethernet Port | *10/100Mbit RJ45 Connector Electrical Isolation 1500 Vrms at 50 to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 *Ethernet Broadcast Storm Resiliency – less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration |
| Shipped With Each Unit | 2.5 mm screwdriver, J180 Power Connector |
