-
MVI46-DFCM
When needing additional DF1 ports in your SLC system, the MVI46-DFCM Network Interface Module is the fastest and easiest way to add DF1 Half/Full Duplex Master and Slave capability. This module has two powerful and fully configurable DF1 ports allowing the many SCADA and field devices supporting the DF1 protocol to be integrated into the SLC platform.
-
MVI46-DNP
The DNP 3.0 Master/Slave Network Interface Module allows SLC processors to interface with the many field devices that support the DNP protocol. DNP (Distributed Network Protocol) is an open communication protocol developed to achieve interoperability among systems specifically in the electric utility, oil & gas and water/wastewater industries.
-
MVI46-GSC
The Generic Serial ASCII Network Interface Module is a fast and easy way to add two fully configurable ASCII communication ports to the SLC platform without consuming the front port of the processor. This allows the SLC processor to interface with any generic ASCII device such as bar code scanners, weigh scale interfaces, legacy ASCII protocol connections, terminal port emulation and printer drivers. Each port supports the sending and receiving of large ASCII character strings and is individually configurable.
-
MVI56-101M
The MVI56 IEC 60870-5-101 Master Network Interface Module allows ControlLogix processors to interface easily with IEC 60870-5-101 Slave devices. The MVI56-101M module interfaces up to 32 serial communication devices with the ControlLogix processor. Two communication ports on the module act as controlling devices (Masters) to interface with controlled devices on their own networks.
-
MVI56-101S
The MVI56 IEC 60870-5-101 Slave Network Interface Module is the fastest and easiest way to add IEC 60870-5-101 protocol interface connectivity for the ControlLogix platform. The module has two powerful and highly configurable IEC 60870-5-101 Slave ports, allowing the many SCADA and field devices supporting the IEC protocol to be integrated into the ControlLogix platform.
-
MVI56-103M
The MVI56 IEC 60870-5-103 Master Network Interface Module allows ControlLogix processors to interface easily with IEC 60870-5-103 Slave devices. The MVI56-103M module interfaces up to 32 serial communication devices with the ControlLogix processor. Two communication ports on the module act as controlling devices (Masters) to interface with controlled devices on their own networks.
-
MVI56-BSAPS
The MVI56 Bristol Babcock Serial Slave Module allows Rockwell Automation ControlLogix I/O compatible processors to interface easily with Bristol Babcock Serial communication devices.
-
MVI56-DFCM
When needing additional DF1 ports in your ControlLogix system, the MVI56-DFCM Network Interface Module is the fastest and easiest way to add DF1 Half/Full Duplex Master and Slave capability. This module has two powerful and fully configurable DF1 ports allowing the many SCADA and field devices supporting the DF1 protocol to be integrated into the ControlLogix platform.
-
MVI56-DFCMR
When needing additional DF1 ports in your ControlLogix system, the MVI56-DFCM Network Interface Module is the fastest and easiest way to add DF1 Half/Full Duplex Master and Slave capability. This module has two powerful and fully configurable DF1 ports allowing the many SCADA and field devices supporting the DF1 protocol to be integrated into the ControlLogix platform.
-
MVI56-DNP
The DNP 3.0 Master/Slave Network Interface Module allows ControlLogix processors to interface with the many field devices that support the DNP protocol. DNP (Distributed Network Protocol) is an open communication protocol developed to achieve interoperability among systems specifically in the electric utility, oil & gas and water/wastewater industries.
-
MVI56-GEC
The MVI56 Generic ASCII Ethernet Interface module is designed to allow ControlLogix processors to interface easily with ASCII devices using the TCP/IP protocol and the ControlLogix processor. Compatible devices may be either ASCII instruments with Ethernet built-in or Ethernet connection via a thin server to the existing ASCII device.
-
MVI56-MBP
The MVI56 Modbus Plus Dual Port Network Interface Module allow Rockwell Automation ControlLogix processors to connect directly on Modbus Plus networks as a peer. The module acts as an input/output module between the Modbus Plus network and the processor. Compatible devices can be found in most industries and include devices such as drives, relays and power monitor hardware.